澳洲AS/NZS 3112 图A1三插扁平插脚量规|250V三扁平插销插头量规|FIGURE A1-GAUGE FOR THREE-PIN 250 V MAX. FLAT-PIN PLUGS|Figure A1-Gauge

澳洲AS/NZS 3112 图A1三插扁平插脚量规|250V三扁平插销插头量规|FIGURE A1-GAUGE FOR THREE-PIN 250 V MAX. FLAT-PIN PLUGS|Figure A1-Gauge

澳洲AS/NZS3112图A1三插扁平插脚量规|250V三扁平插销插头量规|FIGUREA1-GAUGEFORTHREE-PIN250VMAX.FLAT-PINPLUGS|FigureA1-Gauge标准：符合AS/NZS3112-2012（或最新版）要求；规格：10A、15A和20A各1个；使用要求：3个未进行测试的插头按AS/NZS3109.1标准所述在滚筒中进行测试.样品从500mm高度跌落

详细信息

澳洲AS/NZS 3112 图A1三插扁平插脚量规|250V三扁平插销插头量规|FIGURE A1-GAUGE FOR THREE-PIN 250 V MAX. FLAT-PIN PLUGS|Figure A1-Gauge

标准：符合AS/NZS 3112-2012（或最新版）要求；

规格：10A、15A和20A各1个；
使用要求：

3个未进行测试的插头按AS/NZS 3109.1标准所述在滚筒中进行测试. 样品从 500mm高度跌落到 3mm厚的钢板上.每跌落 100 次后,目视插片并直接通过图 A1或 F1 的治具. 总跌落次数为1000次.
Three plugs, not subjected to any previous tests. The samples are dropped from a height of 500 mm onto a steel plate, 3 mm thick. After each 100 drops the pins are inspected and straightened to pass through the gauge of Figure A1 or F1. The total number of falls shall be 1000.
数量：依订购。

澳洲AS/NZS 3112插头插座量规汇总清单方便查询各量规： http://www.ag17.wang/product/AS_NZS3112_Gauge.html

安规仪器网/美华安规仪器---追崇原创、重视知识产权和尊重劳动成果，也是行业发展主旨，禁止盗链、采集、复制及转载等非法行为，一经发现保留追责权力。

标签: 澳洲AS/NZS 3112 图A1三插扁平插脚量规 250V三扁平插销插头量规 FIGURE A1-GAUGE FOR THREE-PIN 250 V MAX. FLAT-PIN PLUGS Figure A1-Gauge

澳洲AS/NZS 3112 图A1三插扁平插脚量规|250V三扁平插销插头量规|FIGURE A1-GAUGE FOR THREE-PIN 250 V MAX. FLAT-PIN PLUGS|Figure A1-Gauge

澳洲AS/NZS 3112 图A1三插扁平插脚量规|250V三扁平插销插头量规|FIGURE A1-GAUGE FOR THREE-PIN 250 V MAX. FLAT-PIN PLUGS|Figure A1-Gauge

您可能喜欢

澳洲AS/NZS 3112插头插座量规清单|AS/NZS 3112 Gauge

澳洲AS/NZS 3112图3.7检查横向应力治具(两插销)| FIGURE 3.7 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (TWO-PIN GAUGE)

澳洲AS/NZS 3112图3.6检查横向应力治具(三插销)| FIGURE 3.6 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (THREE-PIN GAUGE)

澳洲AS/NZS 3112图3.1深度规|SAA插座不接触深度规|不接触深度测试量规|FIGURE 3.1 GAUGE FOR DEPTH OF NO-CONTACT TEST|FIGURE 3.1 Gauge

澳洲AS/NZS 3112条款2.8.1节插销到边沿距离检测规|澳规插头PIN 9mm距离量规|The 9 mm distance gauge for SAA plug pin and the edge of AS/NZS 3112 clause 2.8.1

澳洲AS/NZS 3112图G1插头量规|图G1(a)两扁带电插销和圆形接地插销测试插头|图G1(b)两圆带电插销和扁形接地插销测试插头|FIGURE G1-THREE-PIN TEST PLUG WITH FLAT AND ROUND PINS FOR TESTS TO CLAUSES 3.3.4 AND 3.8.1|Figure G1- THREE-PIN TEST PLUG

澳洲AS/NZS 3112 图F1插头量规|F1(a)两扁带电插销和圆形接地插销插头量规| F1(b)两圆带电插销和扁形接地插销插头量规|FIGURE F1-GAUGE FOR FLAT AND ROUND PIN PLUGS|Figure F1- PIN PLUGS

澳洲AS/NZS 3112 图D1非正常插入的三扁平插销测试插头|试验插头| FIGURE D1-THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT PIN 250 V MAX. SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS, IN ACCORDANCE WITH CLAUSE 3.8.2

澳洲AS/NZS 3112 图C1正常插入的试验插头|试验指|正常插入的三扁平插销测试插头和正常插入中试验指测试规|FIGURE C1-THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT PIN 250 V MAX. SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER IN ACCORDANCE WITH CL