IEC61032 Figure 12-Test probe 18|mall finger probe ∅ 8,6|GB/T16842图12-试具18|儿童试验指|小试指∅ 8.6|18型探针|18型探棒

名称：IEC61032 Figure 12-Test probe 18|mall finger probe ∅ 8,6|GB/T16842图12-试具18|儿童试验指|小试指∅ 8.6|18型探针|18型探棒
标准：符合IEC61032|GB/T16842（或最新版）要求;
用途：本试具用于模拟大于36个月小于14岁的儿童是否触及危险部件。
Apply: This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years.
注/Note:
试指：金属材料。
手柄：绝缘材料。
加长手柄代表儿童手臂。手臂可加长451.6mm，试具可带或不带此加长手柄，视严酷程度选择。
两个铰接点可在同一平面内沿同一方向在90°+10’/0范围内转动。
- Finger: metal material
- Handle: insulating material
The extension of the handle represents the arm of the child.
The handle is provided with an extension 451,6 mm long, and the probe should be applied with or without this extension, whichever is the more onerous condition.
Both joints shall permit movement in the same plane and the same direction through an angle of 90°.
加工：本司自有数控设备精密加工，价格较低、品质可控、交期更短、服务更到位;
特点：采用进口工业级模具钢及不锈钢及高强度塑料等，具有高硬度、变形小、耐磨损、抗腐蚀、耐生锈、外观漂亮等优点；
质量：出厂前经过二次元、投影仪、数显千分尺、卡尺测量，满足标准要求及能通过第三方计量；
标识：所有型号和图号均有激光刻字，美观清晰；
数量：1件。