IEC61032 Figure 2-Test probe B|GB/T16842图2-试具B|B型试验指|弯指|B型探针|B型探棒|IEC标准试验弯指|UL82 Figure 9.1 probe|UL998 Figure 5 IEC articulate probe

名称：IEC61032 Figure 2-Test probe B|GB/T16842图2-试具B|B型试验指|弯指|B型探针|B型探棒|IEC标准试验弯指|UL82 Figure 9.1 probe|UL998 Figure 5 IEC articulate probe
标准：符合IEC61032|GB/T16842|UL82|UL998（或最新版）要求;
引用标准：IEC60335/GB4706, GB8898/IEC60065, IEC60598/GB7000, GB4943-2008/IEC60950, IEC60529/GB4208, UL507, UL1278, IEC60745-1/GB3883.1, IEC60884-1/VDE0620-1/GB 2099.1/DS60884-2-D1/IS1293/IEC 60320-1等。

UL各标准试验指针棒销-汇总查询清单: http://www.ag17.wang/shiyanzhi/UL_Test_Probe_lists.html

各试验指针棒汇总和简介一览表：http://www.ag17.wang/safety/safety47.html

用途：本试具用于检验防止人体触及危险部件的基本防护。此试具也用于防止手指触及的防护检验。
Apply: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger.
注/Note:
材料：如无其他规定，采用金属。
未注公差角度的极限偏差：+0/-10';
未注公差带一般线性尺寸的公差：25及以下：0/-0.05；25以上：+/-0.2.
Material: metal, except where otherwise specified.
Tolerance on dimensions when no specific tolerance is given:
–on angles: 0/−10’
–on linear dimensions: up to 25 mm: 0.
–0/0,05 mm; over 25 mm: ± 0,2 mm.
两个铰接点可在同一平面内沿同一方向在90°+10’/0范围内转动。
Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance.
加工：本司自有数控设备精密加工，价格较低、品质可控、交期更短、服务更到位;
特点：采用进口工业级模具钢及不锈钢及高强度塑料等，具有高硬度、变形小、耐磨损、抗腐蚀、耐生锈、外观漂亮等优点；
质量：出厂前经过二次元、投影仪、数显千分尺、卡尺测量，满足标准要求及能通过第三方计量；
标识：所有型号和图号均有激光刻字，美观清晰；
数量：1件。