IEC60884-1:2013中英文版对照-2 Normative references 规范引用

2 Normative references 规范引用

插头插座量规Gauges for plugs and sockets：http://www.ag17.wang/pluggauge/

IEC60884|GB2099|VDE0620 测试设备Testing equipments：

http://www.ag17.wang/plugtester/IEC60884_Test_Equipments_1.html

 

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated  references, the latest edition of the referenced document (including any amendments) applies.

本标准引用下列档案中的条款。凡是注日期的引用档案，其随后所有的修改单（不包括勘误的内容）或修订版均不适用于本标准。凡是不注日期的引用档案，本标准适用其最新版本。

IEC 60050-151:2001, International Electrotechnical Vocabulary – Part 151: Electrical and magnetic devices IEC 60050-442:1998, International Electrotechnical Vocabulary – Part 442: Electrical accessories

IEC 60050-826:1982, International Electrotechnical Vocabulary – Part 826: Electrical installations of buildings

IEC 60068-2-30:1980, Environmental testing – Part 2: Tests – Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)

IEC 60068-2-32:1975, Environmental testing – Part 2: Tests – Test Ed: Free fall (Procedure 1)

IEC 60112:1979, Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

IEC 60245 (all parts), Rubber insulated cables – Rated voltages up to and including 450/750 V

IEC 60417-2:1998, Graphical symbols for use on equipment – Part 2: Symbol originals

IEC 60423:1993, Conduits for electrical purposes – Outside diameters of conduits for electrical installations and threads for conduits and fittings

IEC 60529:2001, Degrees of protection provided by enclosures (IP Code)

IEC 60695-2-10:2000, Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure

IEC 60695-2-11:2000, Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products

IEC 60884-2-6:1997,  Plugs and socket-outlets for household and similar purposes – Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrica installations

IEC 60999-1:1999, Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)

IEC 61032:1997, Protection of persons and equipment by enclosures – Probes for verification

IEC 61140:2001, Protection against electric shock – Common aspects for installation and equipment

ISO 1456:1988, Metallic coatings – Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium

ISO 1639:1974, Wrought copper alloys – Extruded sections – Mechanical properties 1)

ISO 2039-2:1987, Plastics – Determination of hardness – Part 2: Rockwell hardness

ISO 2081:1986, Metallic coatings – Electroplated coatings of zinc on iron or steel

ISO 2093:1986, Electroplated coatings of tin – Specification and test methods